Tradition combined with elegance, the Burntech Traditional Fireplace Series captures the same ambiance and beauty that has warmed homes for over 100 years.

The lightweight modular masonry construction makes installation fast and easy. Flexibility in design allows the customer freedom of choice for installation on either a concrete foundation or on wood framing**.  The Traditional Fireplace Series is designed for both indoor and outdoor use and can be fueled by either wood or gas.

Typical installations can be completed in less than 1 day.

The ability to finish off your Burntech Fireplace system with genuine firebrick and patterns of your choosing is what makes Burntech the #1 choice for Contractors, Architechts and Homeowners.  In order to speed up the installation process we offer Burntech Firebrick Liner kits (sold separately) available in herringbone and standard runningbond.

As with all Burntech Fireplaces, the Traditional Fireplace Series are covered by our Lifetime Limited Warranty*.

*See warranty for more information
**See Installation Manual for more information

Click image to enlarge	Click image to enlarge
Click image to enlarge	Click image to enlarge

Q: Is the Burntech fireplace safe to use?
A: Yes, it has been tested to Underwriters Laboratories, UL 127 Standard for safety. The fireplace is listed by PFS testing agency, ICC, (International Code Council) and quality control standards are used in manufacturing.(ESR -2401)

Q: Can I install the fireplace on a wood floor?
A: Yes: For raised fireplace openings, you must use the required metal base under the fireplace or CMU block as shown in the installation manual. For flush mounted fireplaces the fireplace footprint must me headed off and Non-Combustible structural supports must be added. All clearances must be maintained and a structural engineer is required for designing proper reinforcement. Contact us for sample engineering. Air space clearances range from 6″ to 8″ depending on the model.

Q: Do I have to install the outside air kit on the fireplace?
A: The local building code will tell you if this is required in your area. The fireplace will work without the outside air kit, although, it is more efficient to use outside air for combustion.

Q: Do I need firebrick inside the firebox?
A: Yes: Burntech can supply firebrick panels for easy installation or a mason can lay firebrick inside the firebox.

Q: What type of chimney do I use on this fireplace?
A:The fireplace has been tested with both a masonry chimney, manufactured by Burntech and Class A listed metal chimney. Refer to the Metal Chimney Sizing Chart for information on flue size requirements.  When installed, the maximum overall height of the Burntech fireplace is 40 feet. The minimum installation height is 14 feet, given that the chimney is straight. If the chimney is not straight, the minimum installation height is 17 feet.

Q: Do I need a log holder or grate in the fireplace?
A: Yes, you should use a grate to hold the wood in the firebox for better combustion and safety.

Q: Can I install a mantel or decorative stone or marble on the front of the fireplace?
A: Yes. Just follow the installation instructions for safe installations.

Q: Can I install decorative gas logs in this wood-burning fireplace?
A: Yes. Follow the manufacturer’s instructions for safe installation and operation.

Q: Can I install a log lighter in the fireplace?
A: Yes. Follow the manufacturer’s instructions for safe installation and operation. It is recommended that you use a damper clip for proper ventilation.

Q: Can I install a glass door on the fireplace?
A: Yes, Follow the manufacturer’s instructions and always have doors in the fully open position when using the fireplace.

Q: Can I install fireplace on upper levels floors of a building.
A: Yes with the lightweight design Burntech fireplaces will work on most applications. You must have a structural engineer determine the load limit of the flooring and design a noncombustible system to support the fireplace. Contact us for sample engineering.

Q: Can I install a see-thru wood-burning fireplace?
A:  Yes. The TFS43-ST is designed for this use. You will need to install a chimney exhaust type fan in most installations.

Q: Can I install this fireplace outside?
A: Yes. It is listed for BOTH indoors and outdoors. 

Q: What are the minimum and maximum fireplace heights for the Burntech fireplace?
A: When installed, the maximum overall height of the Burntech fireplace is 40 feet. The minimum installation height is 14 feet, given that the chimney is straight. If the chimney is not straight, the measurement is 17 feet.